• 0 Posts
  • 34 Comments
Joined 5 months ago
cake
Cake day: June 22nd, 2024

help-circle
  • Blowing into an enclosed space is chaotic, the fan has to push against air currents being deflected. Blowing into an open space (aka sucking out of you dishwasher) is much more orderly, the fan can simply pull the air out and there are much fewer air currents running orthogonal.

    This is as far as my very basic knowledge goes here. You can try this effect by exhaling and inhaling air through a barely open mouth or a straw.

    EDIT: On a related note, never “blow” during fellatio.





  • Because expunging an endemic disease is a hell of a lot of effort. Zero Covid didn’t work (ask Winnie the Pooh), so most efforts were undertaken instead to weather the large amount of simultaneous harsh cases where patients required a ventilator and constant medical attention.

    Would it be possible? Probably, but do you really want to convince Billions of people worldwide to regularly buy and use tests, masks and to distance where possible for a few years? I mean, I’m in Biotech, I’d live a fulfilled live employment-wise - if I don’t get gunned down due to political violence that would ensue.






  • I’d like to add that there are good versions of “microloans”! I learned that there used to be (or still are, didn’t check) non-profit " banks" in some parts of India (and South africa I think) that would give out small loans of a few dollars to a few hundred dollars (which can be quite a lot of money in India). There was no collateral and low interest, but a group of people had to apply for a loan together. Until the first loan was paid back, the rest of the group couldn’t apply again. It was meant to provide financial backing and capital to microbusinesses (e.g. fishers, farmers, peddlers) that would otherwise be excluded from the financial market due to a lack of collateral and otherwise be forced to take high-interest loans.




  • Great answers already, I’d like to add a few things: Lithium batteries like to be charged at 1C, meaning that if they have a capacity of 1.6 Ah they like to be charged at 1.6 A and will (theoretically) be fully charged in one hour (this is wrong in practice though). You can charge most of them at a higher rate (e.g. at 3.2 A), but they should be rated for it. If you don’t better, stick to a lower amperage. Too low of an amperage should not be an issue but I’m not sure - it will take ages though.

    The voltage has to fit! Batteries change their voltage over the course of charging/discharging. This is more pronounced in older NiMH or NiCdH (discard those) batteries but still relevant. A 12V charger can charge your batteries to 12V. Most chargers can handle different voltages and will usually select the correct voltage depending on the battery. This is important if you are charging LiIons or LiPos (two types of Lithium batteries), as overcharging them is NOT advised. They generally peak at around 4.2V per cell I think with a working charge (don’t know the term) of 3.7V per cell. Some chargers require you to select the number of cells. Charging a 2-cell LiPo with 12-13 volt is a bad idea I wager and charging a 3-cell LiPo with 9.something volt won’t work (it won’t drain it, but the minimal voltage is higher than what the charger provides - current would like to flow the other way if It could).

    TL,DR: If you can adjust the charging parameters manually or you are doing something the manual states you shouldn’t be doing, educate yourself. If however you only plug in your phone (with a painfully small battery at 2 Ah) and only provide a 1.5A*5V=7.5W charger, you are perfectly fine.